Automatic Water Bottle Rinsing Filling Capping Machine 24 BPM

1.

Filling Capacity - 200 ml to 2000 ml
Output – 24-30 Bottle/Minute

2.

In Feed Conveyor 8 feet S.S. with Air Blower
Out feed Conveyor 16 feet S.S. conveyor with drive motor

NOTE:

All Motor and Drive from Rotomotive Company
All Parts where material is touching belts are made of S.S. 304 Materials.

3.

This Machine is inclusive of Inspection Light Shrink Tunnel.

4.

No Bottle, No Fill.

5.

S.S. 304 SHRINK TUNNEL (Heavy Duty) must provide with auto cut off system to regulate the required heat. It is with auto cut of system with 6 heaters. All heaters are certified and high standards.

6.

Cap elevator ground level hopper with capacity is more than 2000 caps once time.
Motor and drive from Rotomotive.
Hopper motor Power capacity : 0.5 HP

7.

The Interconnecting pipe line for filling machine system along with valve and other fitting shall in S.S.304 grade going to provide by Customer at site.

8.

Filling by gravity filling valve and high standard filling nozzles.
Drain trays for looping of spilled water yes it is having drain trans with the machine.
Machine is cover with S.S. Frame and Acrylic Doors.

9.

Machine Dimension (Approx)

· (W x H x L) Main Machine : 6 x 6 x 6 feet

· In feed conveyor 8 Feet

· Out feed conveyor 16 Feet

· Machine weight : 1200 KG

10.

Machine Power Consumption(Approx)

· In feed conveyor Air Blower : 1 HP

· Machine Main Motor : 1.5 HP

· Cap elevator : 1 HP

· Exit Conveyor motor : 1 HP

· Shrink Tunnel : 3.5 HP